HOW CAN I RESOLVE MACARD N300 SETUP ISSUES?

How Can I Resolve Macard N300 Setup Issues?

How Can I Resolve Macard N300 Setup Issues?

Blog Article

Macard N300 extender is one of the boosters that connects with the router wirelessly as well as with cable. But, if you’re Macard WiFi extender setup is not working or facing other issues, try these fixes to the resolve the issue.
Fixes to Resolve Macard N300 Setup Issues:
There can be many technical errors that occurs while or afterwards of Macard N300 setup. To solve any, you can try below provided tips and solutions.

Use WPS Button Correctly

If your router has a WPS button, then we advise to connect the router with the extender through the WPS connection method. To do that use these instructions:


  • Plug the extender nearby router.

  • Then, press the WPS button on the router.

  • Press the same button on the extender.

  • WPS LED will starts blinking.

  • Wait for the connection to be establish.


The Macard N300 device WPS LED will turn solid from blinking when connection established.
After connection, you can join the extended network via host router SSID username and password.

PC Must Links with Extender Network

The Macard’s setup login URL (go.macard.online) or Ip address 192.168.10.1 will only works when the PC is connected to the extender’s network. So, connect the PC with the extender’s WiFi network first and then try to log into the device. You can either use the Ethernet cable to connect or SSID details (connection wirelessly).

Check URL or IP Searched for Login

The Macard interface login URL is go.macard.online. if the URL not works, use the default IP address to reach the Macard N300 setup login page. The default IP address of every Macard extender is 192.168.10.1. So, check that you are search the correct login URL or IP address to setup the extender.

Use Updated Web Browser

If web browser in which you are trying to load setup login page is outdated, then browser can neglect to load the page. To update web browser on your computer by follow these steps:

1. Open the web browser.
2. Find and select Settings.
3. Choose About option in the settings.
4. Click UPDATE or Check For Update button.

Reboot Extender Network

Rebooting known to refresh any device settings and clear out the bugs from the device. So, rebooting might help solving the Macard N300 setup not working problem. To reboot, you have to disconnect the extender’s power supply and connect the power again.

Reset Macard N300 Extender

Reset your extender if above given tips aren’t working. To reset the extender, you have to press RESET button on the extender given on its side panel with a paper pin or pen. After that, wait for extender to restart and then configure it again.

How to Configure Macard Extender After Reset?

To reconfigure the Macard WiFi extender, you have to link your computer with the extender WiFi network and follow these steps:

1. Open computer’s Web browser.
2. Search the URL go.macard.online.
3. You can also use IP 192.168.10.1.
4. The Macard setup login page appears.
5. Enter the admin login password that is given on the back of the label.
6. Click LOGIN to access the interface and create the Macard WiFi network.
7. In the interface, first select the local router network which you want to extend.
8. Secondly, enter the new WiFi name and password, then click SAVE.

The device will reboot to apply the settings and after that you can connect with it through new WiFi SSID network.
The End Lines
Hope that you have resolved the N300 setup not working issue with the help of above provided troubleshooting tips and solutions.

Report this page